PL3 · RF Coax Jumper
123-14NMSMAMR-12
Low-Loss 240 Braided N-Type Male to SMA Male Right Angle 12FT
12 ft Low-Loss 240 jumper, N-Male to SMA-Male right-angle. 50 ohm, 600-3000 MHz, VSWR 1.32 max.
Stock to 7 days
$38.29
Premier · per ea
Sign in to see your contracted tier pricing — or call (949) 888-5548 for volume pricing.
Details
The 123-14NMSMAMR-05 is a 12-foot RF coax jumper assembly built on Low-Loss 240 cable. One end terminates in a straight N-Type male; the opposite end uses an SMA male right-angle for tight clearance and panel-edge routing. Both connectors are solder-attached, assembled to IPC/WHMA-A-620 Class 2 workmanship.
Electrical performance covers 600 to 3000 MHz with maximum VSWR of 1.32 and return loss of 17 dB or better. PIM is rated at -110 dBc or better at the SMA right-angle interface, suitable for distributed antenna and small-cell jumper service. The 50 ohm characteristic impedance matches standard N and SMA system interfaces.
Low-Loss 240 is the workhorse flexible coax in this gauge class - braided shielding, foam PE dielectric, and a flexible PE jacket. The 0.240 in OD profile threads through tight conduit and panel cutouts where rigid hardline cannot.
Electrical performance covers 600 to 3000 MHz with maximum VSWR of 1.32 and return loss of 17 dB or better. PIM is rated at -110 dBc or better at the SMA right-angle interface, suitable for distributed antenna and small-cell jumper service. The 50 ohm characteristic impedance matches standard N and SMA system interfaces.
Low-Loss 240 is the workhorse flexible coax in this gauge class - braided shielding, foam PE dielectric, and a flexible PE jacket. The 0.240 in OD profile threads through tight conduit and panel cutouts where rigid hardline cannot.
Why this part
Built for installations that need an N-Type connection on one end and an SMA right-angle on the other. Five feet of Low-Loss 240 cable gives you the flexibility to route through panels and cabinets while holding 1.32 VSWR and 17 dB return loss across 600 to 3000 MHz. Solder-attached connectors and IPC/WHMA-A-620 Class 2 workmanship eliminate the variability of field-crimped joints - the assembly arrives terminated and ready to install.
Electrical
Required to build assembly| Insertion Loss @ 30 MHz (dB) | 0.472 |
|---|---|
| Insertion Loss @ 50 MHz (dB) | 0.524 |
| Insertion Loss @ 150 MHz (dB) | 0.696 |
| Insertion Loss @ 220 MHz (dB) | 0.788 |
| Insertion Loss @ 450 MHz (dB) | 1 |
| Insertion Loss @ 600 MHz (dB) | 1.113 |
| Insertion Loss @ 900 MHz (dB) | 1.303 |
| Insertion Loss @ 1500 MHz (dB) | 1.607 |
| Insertion Loss @ 1800 MHz (dB) | 1.739 |
| Insertion Loss @ 2000 MHz (dB) | 1.818 |
| Insertion Loss @ 2500 MHz (dB) | 2.003 |
| Insertion Loss @ 3000 MHz (dB) | 2.183 |
| Insertion Loss @ 5800 MHz (dB) | 2.993 |
| Return Loss (dB) | ≥ 20.8 |
| Shielding Effectiveness (dB) | ≥ 90 |
| Velocity of Propagation (%) | 83 |
| Dielectric Constant | 1.42 |
| Time Delay (ns/ft) | 1.21 |
| Capacitance (pF/ft) | 24.2 |
| Inductance (µH/ft) | 0.060 |
| DC Resistance — Inner Conductor (Ω/1000ft) | 3.2 |
| DC Resistance — Outer Conductor (Ω/1000ft) | 3.89 |
| Voltage Withstand (V DC) | 1500 |
| Jacket Spark (V RMS) | 5000 |
| Peak Power (kW) | 5.6 |
| Impedance (Ohm) | 50 |
| Frequency Range (MHz) | 600 – 3000 |
| Max VSWR | ≤ 1.32 |
| PIM Performance (dBc) | ≤ -110 |
Mechanical
| Mating Cycles (cycles) | 100 |
|---|---|
| Bend Radius — Installation (in) | 0.75 |
| Bend Radius — Repeated (in) | 2.5 |
| Bending Moment (ft-lb) | 0.25 |
| Tensile Strength (lb) | 80 |
| Flat Plate Crush (lb/in) | 20 |
| Cable Weight (lb/ft) | 0.034 |
| Assembly Weight (lb) | 0.508 |
Materials
| Inner Conductor Material | Solid BC |
|---|---|
| Inner Conductor Diameter (in) | 0.056 |
| Dielectric Material | Foam PE |
| Dielectric Diameter (in) | 0.150 |
| Outer Conductor Material | Aluminum Tape |
| Outer Conductor Diameter (in) | 0.155 |
| Overall Braid Material | Tinned Copper |
| Overall Braid Diameter (in) | 0.178 |
| Jacket Material | PE |
| Jacket Diameter (Overall) (in) | 0.240 |
Environmental
| Operating Temperature Range (°C) | -40 to +85 |
|---|---|
| Storage Temperature Range (°C) | -70 to +85 |
| Installation Temperature Range (°C) | -40 to +85 |