PL3 · RF Coax Jumper
123-14NMSMAMR-05
Low-Loss 240 Braided N-Type Male to SMA Male Right Angle 05FT
5 ft Low-Loss 240 jumper, N-Male to SMA-Male right-angle. 50 ohm, 600-3000 MHz, VSWR 1.32 max.
Stock to 7 days
$29.81
Premier · per ea
Sign in to see your contracted tier pricing — or contact sales for volume.
Details
The 123-14NMSMAMR-05 is a 5-foot RF coax jumper assembly built on Low-Loss 240 cable. One end terminates in a straight N-Type male; the opposite end uses an SMA male right-angle for tight clearance and panel-edge routing. Both connectors are solder-attached, assembled to IPC/WHMA-A-620 Class 2 workmanship.
Electrical performance covers 600 to 3000 MHz with maximum VSWR of 1.32 and return loss of 17 dB or better. PIM is rated at -110 dBc or better at the SMA right-angle interface, suitable for distributed antenna and small-cell jumper service. The 50 ohm characteristic impedance matches standard N and SMA system interfaces.
Low-Loss 240 is the workhorse flexible coax in this gauge class - braided shielding, foam PE dielectric, and a flexible PE jacket. The 0.240 in OD profile threads through tight conduit and panel cutouts where rigid hardline cannot.
Electrical performance covers 600 to 3000 MHz with maximum VSWR of 1.32 and return loss of 17 dB or better. PIM is rated at -110 dBc or better at the SMA right-angle interface, suitable for distributed antenna and small-cell jumper service. The 50 ohm characteristic impedance matches standard N and SMA system interfaces.
Low-Loss 240 is the workhorse flexible coax in this gauge class - braided shielding, foam PE dielectric, and a flexible PE jacket. The 0.240 in OD profile threads through tight conduit and panel cutouts where rigid hardline cannot.
Why this part
Built for installations that need an N-Type connection on one end and an SMA right-angle on the other. Five feet of Low-Loss 240 cable gives you the flexibility to route through panels and cabinets while holding 1.32 VSWR and 17 dB return loss across 600 to 3000 MHz. Solder-attached connectors and IPC/WHMA-A-620 Class 2 workmanship eliminate the variability of field-crimped joints - the assembly arrives terminated and ready to install.
Electric Performance
Required to build assembly| Operating Temperature Range | -40 to +85 °C |
|---|---|
| Cable Length | 5 ft |
| Cable Component | 123-14-50 |
| Connector A | 123-14NMS |
| Connector B | 123-14SMAMRS |
| Impedance (Ohm) | 50 |
| Frequency Range (MHz) | 600 – 3000 |
| Max VSWR | ≤ 1.32 |
| Return Loss (dB) | ≥ 17 |
| PIM Performance | ≤ -110 dBc |
| Cable Family | Low-Loss 240 |
| Connector A Type | N-Male, Solder |
| Connector B Type | SMA-Male R/A, Solder |
| Assembly Length | 5 ft |
| Build Standard | IPC/WHMA-A-620 Class 2 |
| Country of Origin | USA |
| HTS Code | 8544.42.20 |
References
| Legacy Part Number | 123-14NMSMAR-05 |
|---|